2.5 pCi/Lmedian basement test in Montgomery CountyPennsylvania: 2.8 pCi/L
29%at or above 4.0 pCi/L59th highest of the 65 Pennsylvania counties with enough records
$1,250median system price since 20205,358 systems
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Source: PA DEP, 5,358 systems, 2020–2026, nominal dollars, as reported by installers. Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.
Montgomery County and the Newark basin
Most of Montgomery County lies in the Newark basin, a lowland of Triassic and Jurassic sandstone, siltstone and shale. The US Geological Survey's 1993 assessment singles the county out: it is "underlain almost entirely by Mesozoic basin rocks" and "has an indoor radon average less than 4 pCi/L", while other counties partly on the same rocks average higher (USGS Open-File Report 93-292-C, p. 135). In the 1987–88 EPA/State screening survey, 60 Montgomery County homes had a median of 2.4 pCi/L and 28 percent above 4 pCi/L (table 1).
The basin is not uniform. The same report notes that black shales of the Lockatong and Passaic Formations and sandstones of the Stockton Formation are a significant source of radon in the New Jersey part of the basin, and may be in Pennsylvania too (p. 135). The Stockton Formation is the geologic unit with the most radon tests in the state: a later USGS study counted 47,897 DEP tests on it between 1990 and 2007, with a median of 2.4 pCi/L (USGS SIR 2013-5143). For the Triassic Lowland setting as a whole, 34 percent of 119,389 tests were at or above 4 pCi/L.
A county median below 4 pCi/L still leaves a sizeable share of tests at or above the action level, as the figures on this page show, which is why each home needs its own test.
How Montgomery County compares
29% of basement tests in Montgomery County were at or above the EPA action level of 4.0 pCi/L: 7 percentage points below the Pennsylvania figure of 36%.
Montgomery County borders Berks, Bucks, Chester, Delaware, Lehigh and Philadelphia counties in Pennsylvania. 4 of them have a higher share of tests at or above 4.0 pCi/L.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Spread of Montgomery County results
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Montgomery County results over time
Tests from 2015–2026 in Montgomery County had a median of 2.4 pCi/L, about the same as the 2.6 pCi/L of tests from 1986–1994. It describes the records, not any one house.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Radon mitigation cost in Montgomery County
The median price reported for 5,358 Montgomery County systems installed since 2020 is $1,250, $50 more than the Pennsylvania median ($1,200). Half of them cost between $1,000 and $1,471.
Source: PA DEP, 5,358 systems, 2020–2026, nominal dollars, as reported by installers. Method.
Among 2,653 Montgomery County systems with a test before and after the work, the median level went from 6.2 to 1.2 pCi/L, and 96% tested below 4.0 pCi/L afterwards.
Source: PA DEP, 2020–2026; among systems with a reported post-mitigation test (2,653); not a random sample. Method.
ZIP codes in Montgomery County
Among Montgomery County ZIP codes with at least 30 tests, 19009 (Bryn Athyn) has the highest share at or above 4.0 pCi/L, 55%, and 19478 (Spring Mount) the lowest, 3.9%.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Place names: GeoNames, CC BY 4.0; borders: US Census Bureau. Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.