1.7 pCi/Lmedian basement test in Philadelphia CountyPennsylvania: 2.8 pCi/L
12%at or above 4.0 pCi/Lthe lowest share of the 65 Pennsylvania counties with enough records
$1,559median system price since 20201,641 systems
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Source: PA DEP, 1,641 systems, 2020–2026, nominal dollars, as reported by installers. Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.
Why Philadelphia reads lower
Philadelphia sits at the edge of the Atlantic Coastal Plain. The US Geological Survey's 1993 assessment of Pennsylvania notes that "most of Philadelphia County" is underlain by Coastal Plain sediments with low uranium concentrations, and that a significant share of the soils on them are clayey with low permeability, which slows the movement of soil gas (USGS Open-File Report 93-292-C, p. 135). The same report rates the Coastal Plain as having generally low radon potential (p. 136).
When the USGS later sorted 548,507 tests from the Pennsylvania DEP database, 1990–2007, by type of ground, it found that the Atlantic Coastal Plain setting had the lowest median of any of the state's 20 hydrogeologic settings, 1.6 pCi/L, and the only one below 2 pCi/L (USGS Scientific Investigations Report 2013-5143). Back in 1987–88, a joint EPA and state screening of 125 Philadelphia homes found a median of just 1.5 pCi/L and about one home in nine over 4 pCi/L (USGS OFR 93-292-C, table 1).
Low is not zero. The report says most of the county, not all of it, is on Coastal Plain sediment, and the DEP records on this page include Philadelphia tests at or above the EPA action level. The USGS report itself warns that its conclusions "cannot be applied to individual homes."
Along the river, the 1993 report describes a belt of young sediment that includes the gray pebbly sand and silt of the Trenton Gravel, with the Pensauken and Bridgeton Formations resting on the older Wissahickon Formation further inland (p. 119). In DEP tests from 1990–2007, results on the Trenton Gravel showed a median of 1.7 pCi/L, and 16 percent of those 8,399 results reached 4 pCi/L or more (USGS SIR 2013-5143, table 1).
Very high results were rare in the early survey too: of the 125 Philadelphia homes screened in 1987–88, about 1 percent read above 20 pCi/L (OFR 93-292-C, table 1). The Coastal Plain setting as a whole accounted for 27,054 results in the later study (USGS SIR 2013-5143, table 2).
Those Tertiary layers, the Pensauken and Bridgeton, are river-laid arkosic quartz sand with pebble beds and only minor clay and silt, according to the survey (p. 119).
In that early survey, while "the majority of counties in Pennsylvania" averaged above 4 pCi/L, Philadelphia was one of 13 counties listed below it, grouped there with Delaware and Montgomery (OFR 93-292-C, p. 127). Where the county lies on the Coastal Plain, the report describes low, flat hills of about 3 to 37 metres, cut by streams draining to the southeast (p. 110).
How Philadelphia County compares
12% of basement tests in Philadelphia County were at or above the EPA action level of 4.0 pCi/L: 24 percentage points below the Pennsylvania figure of 36%.
Philadelphia County borders Bucks, Delaware and Montgomery counties in Pennsylvania. 3 of them have a higher share of tests at or above 4.0 pCi/L.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Spread of Philadelphia County results
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Philadelphia County results over time
Tests from 2015–2026 in Philadelphia County had a median of 1.6 pCi/L, about the same as the 1.8 pCi/L of tests from 1986–1994. It describes the records, not any one house.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Radon mitigation cost in Philadelphia County
The median price reported for 1,641 Philadelphia County systems installed since 2020 is $1,559, $359 more than the Pennsylvania median ($1,200). Half of them cost between $1,300 and $1,875.
Source: PA DEP, 1,641 systems, 2020–2026, nominal dollars, as reported by installers. Method.
Among 611 Philadelphia County systems with a test before and after the work, the median level went from 5.6 to 1.1 pCi/L, and 98% tested below 4.0 pCi/L afterwards.
Source: PA DEP, 2020–2026; among systems with a reported post-mitigation test (611); not a random sample. Method.
ZIP codes in Philadelphia County
Among Philadelphia County ZIP codes with at least 30 tests, 19118 (Philadelphia) has the highest share at or above 4.0 pCi/L, 35%, and 19153 (Philadelphia) the lowest, 0.6%.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Place names: GeoNames, CC BY 4.0; borders: US Census Bureau. Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.