2.0 pCi/Lmedian basement test in Delaware CountyPennsylvania: 2.8 pCi/L
19%at or above 4.0 pCi/L64th highest of the 65 Pennsylvania counties with enough records
$1,300median system price since 20201,485 systems
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Source: PA DEP, 1,485 systems, 2020–2026, nominal dollars, as reported by installers. Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.
Two kinds of ground in Delaware County
Delaware County straddles two geologic regions. Part of the county is underlain by Atlantic Coastal Plain sediments, which the US Geological Survey describes as low in uranium, with soils that are often clayey and slow to pass soil gas (USGS Open-File Report 93-292-C, p. 135). The report groups Philadelphia and Delaware Counties together as having average indoor radon below 4 pCi/L and low radioactivity.
Inland, the county rises onto the Piedmont Upland. There the same report describes Precambrian granitic gneiss running northeast across northern Delaware County, along with small pods of mafic gneiss and serpentinite (p. 114). It lists granitic gneiss among the Piedmont rock types with "some naturally elevated uranium concentrations" (p. 133). Across the whole crystalline Piedmont of the state, Pennsylvania's 118,385 database tests from 1990–2007 give a median of 2.7 pCi/L, one in three at or above 4 pCi/L; the Coastal Plain manages only 1.6 pCi/L and 13 percent (USGS SIR 2013-5143, table 2).
That split is likely one reason a county figure says little about a given street. Two neighbouring houses on different ground, or with different foundations, can test far apart.
Broken down rock by rock, the contrast looks like this: granitic gneiss and granite, 5,830 results with a median of 2.6 pCi/L; Wissahickon Formation schist, 38,298 results with a median of 2.4 pCi/L; and, by the river, Trenton Gravel at 1.7 pCi/L (USGS SIR 2013-5143, table 1).
Soil texture matters as well as rock. On the Piedmont gneiss, the USGS describes silty to sandy loams with more than 15 percent rock fragments, good drainage and moderate to moderately rapid permeability (OFR 93-292-C, pp. 114–115), ground through which soil gas can move readily. The clayey Coastal Plain soils by the river let it through far more slowly.
How Delaware County compares
19% of basement tests in Delaware County were at or above the EPA action level of 4.0 pCi/L: 17 percentage points below the Pennsylvania figure of 36%.
Delaware County borders Chester, Montgomery and Philadelphia counties in Pennsylvania. 2 of them have a higher share of tests at or above 4.0 pCi/L.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Spread of Delaware County results
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Delaware County results over time
Tests from 2015–2026 in Delaware County had a median of 1.9 pCi/L, about the same as the 2.0 pCi/L of tests from 1986–1994. It describes the records, not any one house.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Radon mitigation cost in Delaware County
The median price reported for 1,485 Delaware County systems installed since 2020 is $1,300, $100 more than the Pennsylvania median ($1,200). Half of them cost between $1,150 and $1,525.
Source: PA DEP, 1,485 systems, 2020–2026, nominal dollars, as reported by installers. Method.
Among 563 Delaware County systems with a test before and after the work, the median level went from 5.6 to 1.0 pCi/L, and 97% tested below 4.0 pCi/L afterwards.
Source: PA DEP, 2020–2026; among systems with a reported post-mitigation test (563); not a random sample. Method.
ZIP codes in Delaware County
Among Delaware County ZIP codes with at least 30 tests, 19037 (Glen Riddle Lima) has the highest share at or above 4.0 pCi/L, 50%, and 19029 (Essington) the lowest, 2.3%.
Source: PA DEP radon tests, 1986–2026; tests, not homes; not a random sample. Method.
Place names: GeoNames, CC BY 4.0; borders: US Census Bureau. Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.