36%of Pennsylvania basement tests at or above 4.0 pCi/L
95%of systems tested below 4.0 pCi/L after the work
$1,395median system price, 2025
Source: Pennsylvania Department of Environmental Protection, radon test results reported to DEP, 1986–2026; data retrieved from data.pa.gov, updated 2026-10-20. Residential basement tests; tests, not homes; not a random sample. Method.
Source: Pennsylvania Department of Environmental Protection mitigation records, 2020–2026; among systems with a reported post-mitigation test (26,781 systems). Not a random sample. Method.
Source: Pennsylvania, 9,516 mitigation systems, 2025, nominal dollars, as reported by installers to the Pennsylvania Department of Environmental Protection (data retrieved from data.pa.gov, updated 2026-10-13). Method.
Area results cannot tell you your home's level. The EPA recommends testing all homes below the third floor.
Start with the seller's results, then check them
The EPA's advice to buyers is simple: know the indoor radon level of any home you are thinking of buying. Ask the seller for their radon test results, and if the house already has a radon-reduction system, ask for whatever information they have about it (EPA, Home Buyer's and Seller's Guide to Radon, 2024).
A result on paper is only as good as the test behind it. Before you accept a seller's test, the same guide suggests finding out:
- what the result was;
- who did the test: the owner, a radon professional or someone else;
- where in the house it was taken. A first-floor test says little about a basement you plan to use as living space;
- whether anything has changed since: structural work, alterations, or changes to heating, ventilation and air conditioning, which can all affect radon levels.
Where it matters is easy to see in the Pennsylvania records. Basement tests had a median of 2.8 pCi/L, against 1.5 on first floors and 1.1 on second floors (different homes, not the same home floor by floor); the EPA explains that radon typically moves up through the ground into the home (A Citizen's Guide to Radon, page 4). The levels chart has the full table by floor.
Source: Pennsylvania Department of Environmental Protection, radon test results reported to DEP, 1986–2026; data retrieved from data.pa.gov, updated 2026-10-20. Residential tests, by floor tested; tests, not homes; not a random sample. Method.
If the house has not been tested
The EPA recommends testing as soon as possible and writing the details into the purchase contract: where the test will be placed, who will do it, what kind of test, when, how buyer and seller will share the results and any costs, and when any radon reduction will be done and who will pay for it (EPA, Home Buyer's and Seller's Guide, section "If the Home Has Not Yet Been Tested"). The test should be in the lowest level of the home that could be used regularly, finished or not.
Because home sales run on deadlines, that guide gives short-term testing options designed for real estate transactions. It also warns that short-term results close to the action level are uncertain: if two short-term tests average 4.1 pCi/L, there is about a 50 percent chance that the year-round average is somewhat below or above 4 pCi/L. In Pennsylvania, radon testers must be certified by the Department of Environmental Protection, which keeps the list (PA DEP, radon certification).
Reading the number you get
The EPA recommends fixing a home at 4 pCi/L or above and considering a fix between 2 and 4 pCi/L. It also says that any radon exposure carries some risk and that a level below 4 pCi/L still poses a risk (EPA, Home Buyer's and Seller's Guide, section "Interpreting Radon Test Results"). Among Pennsylvania basement tests, 29% fell between 2 and 3.9 pCi/L, the range where the EPA says consider fixing. To place a single result on the EPA scale and against Pennsylvania records, use the radon levels chart.
A house that already has a system
In Pennsylvania records since 2020, most systems (50,365 of 60,311) are sub-slab systems: a pipe through the floor slab with a fan that draws soil gas from under the house and vents it outside; the EPA says this is the method used in most cases (Home Buyer's and Seller's Guide, section "How to Lower the Radon Level in Your Home").
Source: Pennsylvania, 60,311 mitigation systems, 2020–2026, nominal dollars, as reported by installers to the Pennsylvania Department of Environmental Protection (data retrieved from data.pa.gov, updated 2026-10-13). Method.
Pennsylvania records show what such systems achieve when a test after the work is reported: among 26,781 systems installed since 2020, the median level went from 9.0 pCi/L before to 1.1 pCi/L after, and 95% tested below 4.0 pCi/L.
Source: Pennsylvania Department of Environmental Protection mitigation records, 2020–2026; among systems with a reported post-mitigation test (26,781 systems). Not a random sample. Method.
A system's presence is not a result, though. Ask for the most recent test taken with the system running. The EPA notes that most soil suction systems include a monitor that shows whether the system is operating, that a test should be run with an active system's fan working properly, and that it is a good idea to retest every two years to be sure levels remain low (EPA, A Citizen's Guide to Radon, page 10; Home Buyer's and Seller's Guide). The mitigation systems page has the before-and-after figures by starting level.
What fixing costs, and who pays
If a high level turns up during the sale, the EPA says buyer and seller should discuss the timing and the cost of reducing it, and that most homes can be fixed for about the same cost as other common home repairs. For sellers, it adds that it is better to correct a radon problem before the house goes on the market, when there is more time (EPA, Home Buyer's and Seller's Guide, section on fixing).
Pennsylvania installers report the price of each system to the state. The median price in 2025 was $1,395, and half of the 9,516 systems cost between $1,181 and $1,550. Prices elsewhere can be higher or lower; the cost page breaks them down by year, system type and county, and a quote for the house in front of you is the figure that counts.
Source: Pennsylvania, 9,516 mitigation systems, 2025, nominal dollars, as reported by installers to the Pennsylvania Department of Environmental Protection (data retrieved from data.pa.gov, updated 2026-10-13). Method.
Checklist before you sign
- Get the seller's radon results and details of any existing system.
- Check who tested, where, and what has changed in the house since.
- If there is no recent test from the lowest level you would use, put a test in the contract.
- Agree in writing how a result at or above 4 pCi/L will be handled and paid for.
- If a system is installed, ask for a test taken after installation, and plan to retest.
This guide summarises EPA publications and Pennsylvania records; it is not legal or real estate advice. Contract terms are a matter for the buyer, the seller and their advisers.